Netgear XCM8810 - 8800 SERIES 10-SLOT CHASSIS SWITCH ユーザーズマニュアル
188
|
Chapter 7. PoE
NETGEAR 8800 User Manual
show inline-power stats slot <slot>
The command provides the following information:
•
Firmware status—Displays the firmware state:
•
Operational
•
Not operational
•
Disabled
•
Subsystem failure
•
Card not present
•
Slot disabled
•
Firmware revision—Displays the revision number of the PoE firmware
•
Total ports powered—Displays the number of ports powered on specified slot
•
Total ports awaiting power—Displays the number of remaining ports in the slot that are
not powered
•
Total ports faulted—Displays the number of ports in a fault state
•
Total ports disabled—Displays the number of ports in a disabled state
Displaying Port PoE Information
You can display the PoE configuration, status, and statistics per port.
Displaying Port PoE Configuration
To display PoE configuration for each port, use the following command:
show inline-power configuration ports <port_list>
This command provides the following information:
•
Config—Indicates whether the port is enabled to provide inline power:
•
Enabled: The port can provide inline power.
•
Disabled: The port cannot provide inline power.
•
Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.
•
Label—Displays a text string, if any, associated with the port (15 characters maximum).
Displaying Port PoE Status
To display the PoE status per port, use the following command:
show inline-power info {detail} ports <port_list>
This command provides the following information:
•
State—Displays the port power state:
•
Disabled
•
Searching