Netgear XCM8810 - 8800 SERIES 10-SLOT CHASSIS SWITCH ユーザーズマニュアル
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
446
|
Chapter 17. Security
NETGEAR 8800 User Manual
To remove the default gateway, DNS server addresses, and WINS server information for a
particular VLAN, use the following command:
particular VLAN, use the following command:
unconfigure {vlan} <vlan_name> dhcp-options {[ default-gateway | dns-server
{primary | secondary} | wins-server]}
To remove all the DHCP information for a particular VLAN, use the following command:
unconfigure vlan <vlan_name> dhcp
You can clear the DHCP address allocation table selected entries, or all entries. You would
use this command to troubleshoot IP address allocation on the VLAN. To clear entries, use
the following command:
use this command to troubleshoot IP address allocation on the VLAN. To clear entries, use
the following command:
clear vlan <vlan_name> dhcp-address-allocation [[all {offered | assigned |
declined | expired}] | <ipaddress>]
Displaying DHCP Information
To display the DHCP configuration, including the DHCP range, DHCP lease timer, network
login lease timer, DHCP-enabled ports, IP address, MAC address, and time assigned to each
end device, use the following command:
login lease timer, DHCP-enabled ports, IP address, MAC address, and time assigned to each
end device, use the following command:
show dhcp-server {vlan <vlan_name>}
To view only the address allocation of the DHCP server on a VLAN, use the following
command:
command:
show vlan <vlan_name> dhcp-address-allocation
To view only the configuration of the DHCP server on a VLAN, use the following command:
show {vlan} <vlan_name> dhcp-config
IP Security
This section describes a collection of IP security features implemented in XCM8800. If you
configure any of the features described in this section, you can enhance your network
security by controlling which hosts are granted or not granted access to your network.
configure any of the features described in this section, you can enhance your network
security by controlling which hosts are granted or not granted access to your network.
Note:
Currently, BlackDiamond 20800 series switches do not support “IP
Security.”
The IP security features described in this section are: