Netgear XCM8810 - 8800 SERIES 10-SLOT CHASSIS SWITCH ユーザーズマニュアル
Chapter 17. Security
|
503
NETGEAR 8800 User Manual
#*********************************************************
configure lldp port $EVENT.USER_PORT advertise vendor-specific dot1 vlan-name vlan
$voiceVlan
configure lldp port $EVENT.USER_PORT advertise vendor-specific avaya-netgear
call-server $callServer
configure lldp port $EVENT.USER_PORT advertise vendor-specific avaya-netgear
file-server $fileServer
configure lldp port $EVENT.USER_PORT advertise vendor-specific avaya-netgear
dot1q-framing tagged
configure lldp port $EVENT.USER_PORT advertise vendor-specific med capabilities
#configure lldp port $EVENT.USER_PORT advertise vendor-specific med policy application
voice vlan $voiceVlan dscp 46
# If port is PoE capable, uncomment the following lines
#***************************************************************
# Configure the POE limits for the port based on the phone requirement
#***************************************************************
configure lldp port $EVENT.USER_PORT advertise vendor-specific med power-via-mdi
#configure inline-power operator-limit $EVENT.DEVICE_POWER ports $EVENT.USER_PORT
create log entry UPM_Script_A-AVAYA_Finished_Port_$EVENT.USER_PORT
Note:
Parts of the scripts make use of the QP8 profile. This is NOT
recommended. For voice, use QP7 for QOS.
Note:
This script uses tagging for the phone and the ports for the voice
VLAN. This is NOT necessary; use multiple supplicant and use
untagged for the phones.
untagged for the phones.
Configuring a Windows XP Supplicant for 802.1x
Authentication
Authentication
For complete instructions on setting up a Windows XP supplicant, see the product
documentation for Microsoft Windows XP. This section provides an overview procedure for
configuring a Windows XP supplicant.
documentation for Microsoft Windows XP. This section provides an overview procedure for
configuring a Windows XP supplicant.
Note:
For enhanced security, install the FreeRADIUS server CA certificate
(the CA that signed the certificate installed in
eap.conf
).
To configure the supplicant:
1.
Open the network configuration panel and select the network card and enter the
properties.
properties.