Netgear XCM8810 - 8800 SERIES 10-SLOT CHASSIS SWITCH ユーザーズマニュアル
Chapter 22. RIP
|
665
NETGEAR 8800 User Manual
Figure 70. Route Redistribution
Configuring Route Redistribution
Exporting routes from one protocol to another and from that protocol to the first one are
discrete configuration functions. For example, to run OSPF and RIP simultaneously, you
must first configure both protocols and then verify the independent operation of each. Then
you can configure the routes to export from OSPF to RIP and the routes to export from RIP to
OSPF. Likewise, for any other combinations of protocols, you must separately configure each
to export routes to the other.
discrete configuration functions. For example, to run OSPF and RIP simultaneously, you
must first configure both protocols and then verify the independent operation of each. Then
you can configure the routes to export from OSPF to RIP and the routes to export from RIP to
OSPF. Likewise, for any other combinations of protocols, you must separately configure each
to export routes to the other.
Redistributing Routes into RIP
Enable or disable the exporting of static, direct, BGP-learned, and OSPF-learned routes into
the RIP domain using the following commands:
the RIP domain using the following commands:
enable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 |
ospf-extern2 | ospf-inter | ospf-intra | static] [cost <number> {tag <number>}
| policy <policy-name>]
disable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 |
ospf-extern2 | ospf-inter | ospf-intra | static]
These commands enable or disable the exporting of static, direct, and OSPF-learned routes
into the RIP domain. You can choose which types of OSPF routes are injected, or you can
simply choose
into the RIP domain. You can choose which types of OSPF routes are injected, or you can
simply choose
ospf
, which will inject all learned OSPF routes regardless of type. The default
setting is disabled.
EX_046
OSPF AS
Backbone Area
0.0.0.0
Area
121.2.3.4
ABR
ASBR
ASBR
RIP AS