Netgear XCM8810 - 8800 SERIES 10-SLOT CHASSIS SWITCH ユーザーズマニュアル

Read community strings provide read-only access to the switch. The default read-only 

community string is public. 

Read-write community strings provide read- and-write access to the switch. The 

default read-write community string is private.

System contact (optional)—The system contact is a text field that enables you to enter 

the name of the person(s) responsible for managing the switch.

System name (optional)—The system name enables you to enter a name that you have 

assigned to this switch. The default name is the model name of the switch (for example, 
XCM8806-1.2).

System location (optional)—Using the system location field, you can enter the location 

of the switch.

Displaying SNMP Settings

To display the SNMP settings configured on the switch, use the following command:

show management

This command displays the following information:

Enable/disable state for Telnet and SNMP access

Login statistics

Enable/disable state for idle timeouts

Maximum number of CLI sessions

SNMP community strings

SNMP trap receiver list

SNMP trap receiver source IP address 

SNMP statistics counter

SSH access states of enabled, disabled, and module not loaded

CLI configuration logging

SNMP access states of v1, v2c disabled and v3 enabled 

Enable/disable state for Remote Monitoring (RMON) 

Access-profile usage configured via Access Control Lists (ACLs) for additional Telnet and 

SSH2 security

CLI scripting settings

Enable/disable state 

Error message setting

Persistence mode

Dropped SNMP packet counter.