Netgear M6100 – Campus Edge and SMB Core Chassis Switches 管理者ガイド

Select QoS > CoS > Basic > CoS Configuration. 

A screen similar to the following displays.

Select the Global radio button.

In the Global Trust Mode list, select trust dot1p.

Click Apply to save the settings.

The example is shown as CLI commands and as a web interface procedure.

(Netgear Switch) (Config)#cos-queue min-bandwidth?

<bw-0>                   Enter the minimum bandwidth percentage for Queue 0.

(Netgear Switch) (Config)#cos-queue min-bandwidth 15

Incorrect input! Use 'cos-queue min-bandwidth <bw-0>..<bw-7>.

(Netgear Switch) (Config)#cos-queue min-bandwidth 15 25 10 5 5 20 10 10

(Netgear Switch) (Config)#cos-queue strict?

<queue-id>               Enter a Queue Id from 0 to 7.

(Netgear Switch) (Config)#cos-queue strict 1?

<cr>                     Press Enter to execute the command.

<queue-id>               Enter an additional Queue Id from 0 to 7.

(Netgear Switch) (Config)#cos-queue strict 1

For Interface 1/0/2, set the minimum bandwidth to 15 for queue 0.

a. Select QoS > CoS > Advanced > Interface Queue Configuration.