Netgear M6100 – Campus Edge and SMB Core Chassis Switches 管理者ガイド

Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration. 

A screen similar to the following displays.

b.  For Routing Mode, select the Enable radio button.

c.  Click Apply.

Configure 1/0/1 as a routing port and assign an IP address to it.

a. Select Routing > IP > Advanced > IP Interface Configuration. 

A screen similar to the following displays.

b.  Under IP Interface Configuration, scroll down and select the Port 1/0/1 check box. 

Now 1/0/1 appears in the Port field at the top.

c.  Enter the following information:

In the IP Address field, enter 192.168.2.2. 

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d.  Click Apply to save the settings.

Configure 1/0/9 as a routing port and assign an IP address to it.

a. Select Routing > IP > Advanced > IP Interface Configuration.