Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch ハードウェアマニュアル

Use the provided Phillips head screws to fasten the brackets to the sides of the 
switch.

mounting
bracket

Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket. 

Align the bracket and rack holes. Use two pan-head screws with nylon washers to 
fasten each bracket to the rack. 

Tighten the screws with a No. 2 Phillips screwdriver to secure the switch in the rack. 

Check the Installation

Before you apply power, perform the following checks:

Inspect the equipment thoroughly.

Verify that all cables are installed correctly.

Check cable routing to ensure that cables are not damaged and will not create a safety 
hazard.

Be sure that all equipment is mounted properly and securely.

Connect to Power and Check the LEDs

The switch does not have an On/Off switch. The only way to apply or remove power is to 
connect or disconnect the power cord. Before you connect the power cord, select an AC 
outlet that is not controlled by a wall switch (which can turn off power to the switch). 

After you select an appropriate outlet, follow these steps to apply AC power.