Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch プリント

Only multicast address filters will have destination port lists.

This command displays the Static Filtering entries in the Multicast Forwarding Database 
(MFDB) table. 

show mac-address-table staticfiltering

DHCP L2 Relay Agent Commands

You can enable the switch to operate as a DHCP Layer 2 relay agent to relay DHCP requests 
from clients to a Layer 3 relay agent or server. The Circuit ID and Remote ID can be added to 
DHCP requests relayed from clients to a DHCP server. This information is included in DHCP 
Option 82, as specified in sections 3.1 and 3.2 of RFC3046.

The MAC Address of the static MAC filter entry.

The VLAN ID of the static MAC filter entry.

The source port filter set's slot and port(s).

Privileged EXEC

A unicast MAC address for which the switch has forwarding and or filtering information. 
As the data is gleaned from the MFDB, the address will be a multicast address. The 
format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example 
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes. 

The type of the entry. Static entries are those that are configured by the end user. 
Dynamic entries are added to the table as a result of a learning process or protocol.

The text description of this multicast table entry. 

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).