Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch プリント
IP Multicast Commands
335
ProSafe Managed Switch
IGMP Proxy Commands
The IGMP Proxy is used by IGMP Router (IPv4 system) to enable the system to issue IGMP
host messages on behalf of hosts that the system discovered through standard IGMP router
interfaces. With IGMP Proxy enabled, the system acts as proxy to all the hosts residing on its
router interfaces.
host messages on behalf of hosts that the system discovered through standard IGMP router
interfaces. With IGMP Proxy enabled, the system acts as proxy to all the hosts residing on its
router interfaces.
ip igmp-proxy
This command enables the IGMP Proxy on the router. To enable the IGMP Proxy on the
router, you must enable multicast forwarding. Also, make sure that there are no multicast
routing protocols enabled on the router.
router, you must enable multicast forwarding. Also, make sure that there are no multicast
routing protocols enabled on the router.
Format
ip igmp-proxy
Mode
no ip igmp-proxy
This command disables the IGMP Proxy on the router.
Format
no ip igmp-proxy
Mode
ip igmp-proxy unsolicit-rprt-interval
This command sets the unsolicited report interval for the IGMP Proxy router. This command
is valid only when you enable IGMP Proxy on the interface. The value of <interval> can
be 1-260 seconds.
is valid only when you enable IGMP Proxy on the interface. The value of <interval> can
be 1-260 seconds.
Default
Format
ip igmp-proxy unsolicit-rprt-interval <interval>
Mode
Number of
Joins
Joins
The number of times a group membership has been added on this interface.
Number of
Groups
Groups
The current number of membership entries for this interface.
Interface Config
Interface Config
1
Interface Config
Term
Definition