Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch プリント

This command displays the status of all the interfaces, including protected and unprotected 
interfaces.

show switchport protected <groupid>

This command displays the status of the interface (protected/unprotected) under the groupid.

show interfaces switchport <unit/slot/port> <groupid>

Private Group Commands

This section describes commands used to configure private group and view private group 
configuration information. 

Private group can be used to create a group of ports that can or can not share traffic to each 
others in the same VLAN group. The main application is to isolate a group of users from 
another without using VLAN.

This command is used to assign one port or a range of ports to private group 
<privategroup-name> (or <private-group-id>).

• Privileged EXEC

• User EXEC

The number that identifies the protected port group.

An optional name of the protected port group. The name can be up to 32 alphanumeric 
characters long, including blanks. The default is blank.

List of ports, which are configured as protected for the group identified with <groupid>. If 
no port is configured as protected for this group, this field is blank.

• Privileged EXEC

• User EXEC

A string associated with this group as a convenience. It can be up to 32 alphanumeric 
characters long, including blanks. The default is blank. This field is optional.

Indicates whether the interface is protected or not. It shows TRUE or FALSE. If the group 
is a multiple groups then it shows TRUE in Group <groupid>.