Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch ソフトウェアガイド
Getting Started
16
7000 Series Managed Switch
Configuring for Web Access
To enable Web access to the switch:
1.
Configure the switch for in-band connectivity. (See
5.)
2.
Enable Web mode:
a. At the CLI prompt, enter the show network command.
b. Set Web Mode to Enabled.
Starting the Web Interface
Follow these steps to start the switch Web interface:
1.
Enter the IP address of the switch in the Web browser address field.
2.
When the Login screen displays, click Login.
3.
Enter the appropriate user name and password. The user name and associated password
are the same as those used for the terminal interface. Click the Login button.
are the same as those used for the terminal interface. Click the Login button.
4.
A menu displays, with selections on the left.
5.
Make a selection by clicking it.
Web Interface Layout
The Web interface is called the Prosafe Control Center (PCC). When you use the switch’s IP
address to log in to the switch, the following screen displays:
address to log in to the switch, the following screen displays: