Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド
Configuring Switching Information
182
M6100 Web Management User Guide
2.
Use Querier Election Participate Mode to enable or disable the MLD Snooping Querier
participate in election mode. When this mode is disabled, up on seeing other Querier of
same version in the VLAN, the Snooping Querier move to non-querier state. Only when this
mode is enabled, the Snooping Querier will participate in Querier election where in the least
IP address will win the Querier election and operates as the Querier in that VLAN. The other
Querier moves to non-querier state.
3.
Use Querier VLAN Address to specify the Snooping Querier Address to be used as source
address in periodic MLD queries sent on the specified VLAN.
Field
Description
Operational State
Specifies the operational state of the MLD Snooping
Querier on a VLAN. It can be in any of the following
states:
Querier on a VLAN. It can be in any of the following
states:
•
Querier: Snooping switch is the Querier in the
VLAN. The Snooping switch will send out
periodic queries with a time interval equal to the
configured Querier query interval. If the
Snooping switch sees a better Querier in the
VLAN, it moves to non-querier mode.
VLAN. The Snooping switch will send out
periodic queries with a time interval equal to the
configured Querier query interval. If the
Snooping switch sees a better Querier in the
VLAN, it moves to non-querier mode.
•
Non-Querier: Snooping switch is in Non-Querier
mode in the VLAN. If the Querier expiry interval
timer is expired, the Snooping switch will move
into Querier mode.
mode in the VLAN. If the Querier expiry interval
timer is expired, the Snooping switch will move
into Querier mode.
•
Disabled: Snooping Querier is not operational on
the VLAN. The Snooping Querier moves to
disabled mode when MLD Snooping is not
operational on the VLAN or when the Querier
address is not configured or the network
management address is also not configured.
the VLAN. The Snooping Querier moves to
disabled mode when MLD Snooping is not
operational on the VLAN or when the Querier
address is not configured or the network
management address is also not configured.
Operational Version
Displays the operational MLD protocol version of the
Querier.
Querier.
Last Querier Address
Displays the IP address of the last Querier from
which a query was snooped on the VLAN.
which a query was snooped on the VLAN.
Last Querier Version
Displays the MLD protocol version of the last Querier
from which a query was snooped on the VLAN.
from which a query was snooped on the VLAN.
Operational Max Response Time
Displays maximum response time to be used in the
queries that are sent by the Snooping Querier.
queries that are sent by the Snooping Querier.
MVR Configuration
From the MVR Configuration link under the Switching tab, you can configure the MVR
settings.
settings.
From the MVR Configuration link, you can access the following pages:
•
•