Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド
Configuring System Information
45
M6100 Web Management User Guide
To add a static entry to the local DNS table:
1.
Specify the static host name to add. Its length can not exceed 255 characters and it is a
mandatory field for the user.
2.
Specify the IP address in standard IPv4 dot notation to associate with the hostname.
3.
Click Add. The entry appears in the list below.
4.
To remove an entry from the static DNS table, select the check box next to the entry and
click Delete.
5.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6.
Click Clear to clear all the dynamic host name entries from the list.
The Dynamic Host Mapping table shows host name-to-IP address entries that the switch has
learned. The following table describes the dynamic host fields.
learned. The following table describes the dynamic host fields.
Table 21.
Field
Description
Host
Lists the host name you assign to the specified IP address.
Total
Amount of time since the dynamic entry was first added to the table.
Elapsed
Amount of time since the dynamic entry was last updated.
Type
The type of the dynamic entry.
Addresses
Lists the IP address associated with the host name.
DNS - Dynamic Host Mapping
SDM Template Preference
You can use this page to configure SDM template preferences for the switch.
To access this page, click System
Management
DNS
SDM Template Preference
.