Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド
Maintenance
521
M6100 Web Management User Guide
To reboot the switch:
1.
In the Reboot Unit No. field, select the unit to reset. When multiple units are connected in a
chassis, select All to reset all the units in the stack (in other words, the whole chassis) or
select the unit number to reset only the specific unit.
2.
Select the Save prior to reboot radio button and click the Apply button to reboot the
switch. Prior to reboot the unit, the current configuration will be saved first.
3.
Select the Don't save prior to reboot radio button and click the Apply button to reboot the
switch. This option permits the user to reboot the unit without saving the current
configuration.
Power Cycle
Use the Power Cycle page to reboot the blade if it is not responding. To access the Power
Cycle page, click Maintenance
Cycle page, click Maintenance
Reset
Power Cycle
. The following page is displayed.
To reboot the switch:
1.
Select the slot from the list.
2.
Click Apply to do the hardware switch reboot.
3.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Factory Default
Use the Factory Default page to reset the system configuration to the factory default values.