Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド

Use this menu to download a file to the switch from a USB device. 

To display the USB File Download page, click Maintenance 





.

Use File Type to specify what type of file you want to download:

 - Specify archive (STK) code when you want to download to the operational 

flash.

 to specify configuration in text mode when you want to update 

the switch’s configuration (Startup-config). If the file has errors, the update will be 
stopped. The factory default is Archive. 

Use Image Name to select one of the images from the list:

 - Select image1 to download to image1.

 - Select image2 to download to image2.

This field is visible only when File Type Archive is selected.

Use USB File to give a name along with path for the file you want to download. You may 

enter up to 32 characters. The factory default is blank.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch. 

Click Apply to send the updated configuration to the switch. Configuration changes take 

effect immediately.

Download Status displays the status of the file transfer to the switch. The last row of the 

table is used to display information about the progress of the file transfer. It is displayed only 

after the process starts. The screen will refresh automatically until the file transfer completes.

The system maintains two versions of the M6100 Chassis switch software in permanent 
storage. One image is the active image, and the second image is the backup image. The 
active image is loaded during subsequent switch restarts. This feature reduces switch down 
time when upgrading or downgrading the M6100 Chassis switch software.

The File Management menu contains links to the following options: