Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH ハードウェアマニュアル
Chapter 6. Commands for Configuring LLDP
|
269
6
6.
Commands for Configuring LLDP
This chapter describes commands for doing the following:
•
Configuring LLDP
•
Managing LLDP
•
Displaying LLDP information
For an introduction to LLDP, see the NETGEAR 8800 User Manual.
configure lldp med fast-start repeat-count
configure lldp med fast-start repeat-count <count>
Description
The fast-start feature is automatically enabled when you enable the LLDP MED capabilities
TLV. This command configures how many times, from 1 to 10, the switch sends out an LLDP
MED packet with an interval of 1 second.
TLV. This command configures how many times, from 1 to 10, the switch sends out an LLDP
MED packet with an interval of 1 second.
Syntax Description
Default
3.
Usage Guidelines
When the switch detects a MED-capable device, this count determines how many times the
switch sends a LLDP MED TLVs with an interval of 1 second. The fast-start feature enables
the MED-capable device to quickly learn information; this command changes the value from
the default 3. The fast-start feature is automatically enabled when you enable the LLDP MED
capabilities TLV.
switch sends a LLDP MED TLVs with an interval of 1 second. The fast-start feature enables
the MED-capable device to quickly learn information; this command changes the value from
the default 3. The fast-start feature is automatically enabled when you enable the LLDP MED
capabilities TLV.
count
Specifies the number of times the switch transmits LLDP MED TLVs each second
(once it detects a neighbor transmitting LLDP MED TLVs). The range is 1 to 10.
(once it detects a neighbor transmitting LLDP MED TLVs). The range is 1 to 10.