Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series ハードウェアマニュアル
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Introduction
6
S3300 Smart Switch
Hardware Overview
This installation guide is for the following S3300 Smart Switch models:
•
S3300-52X. Supports forty eight 10/100/1000 Mbps ports, two dedicated
100M/1G/10GBASE-T ports, and two dedicated 10G/1G SFP+ ports.
100M/1G/10GBASE-T ports, and two dedicated 10G/1G SFP+ ports.
•
S3300-52X-PoE+. Supports forty eight 10/100/1000 Mbps PoE+ capable ports
(IEEE
(IEEE
802.1at), two dedicated 100M/1G/10GBASE-T ports, and two dedicated 10G/1G
SFP+ ports.
•
S3300-28X. Supports twenty four 10/100/1000 Mbps ports, two dedicated
100M/1G/10GBASE-T ports, and two dedicated 10G/1G SFP+ ports.
100M/1G/10GBASE-T ports, and two dedicated 10G/1G SFP+ ports.
•
S3300-28X-PoE+. Supports twenty four 10/100/1000 Mbps PoE+ capable ports
(IEEE
(IEEE
802.1at), two dedicated 100M/1G/10GBASE-T ports, and two dedicated 10G/1G
SFP+ ports.
You can configure the dedicated 10GBASE-T and SFP+ ports on the smart switch either as
Ethernet ports or as stacking links.
Ethernet ports or as stacking links.
Using these 10G copper and fiber ports, you can also create high-speed connections to a
server or network backbone. For example, you can do the following:
server or network backbone. For example, you can do the following:
•
Connect switches to each other with high-speed links
•
Link to high-speed servers
•
Provide 10G/1G/100M copper and 10G/1G fiber connectivity
•
Connect up to six switches in a stack to create a high-port-capacity solution with a single
point of administration
point of administration
The smart switch can be freestanding, stacked with other switches, or rack-mounted in a
wiring closet or equipment room. It is IEEE compliant and offers low latency for high-speed
networking.
wiring closet or equipment room. It is IEEE compliant and offers low latency for high-speed
networking.
All ports can automatically negotiate to the highest speed, which makes the smart switch very
suitable for environments with a mix of Ethernet, Fast Ethernet, Gigabit Ethernet, or
10-Gigabit Ethernet devices. The 10/100 Mbps ports can operate in half-duplex or full-duplex
mode. The 10G/1G ports always operate in full-duplex mode.
10-Gigabit Ethernet devices. The 10/100 Mbps ports can operate in half-duplex or full-duplex
mode. The 10G/1G ports always operate in full-duplex mode.
The maximum segment length is 328 feet (100 meters) over Category 5 unshielded
twisted-pair (UTP) cable. For 10GBASE-T connections, NETGEAR recommends that you
use a Category
twisted-pair (UTP) cable. For 10GBASE-T connections, NETGEAR recommends that you
use a Category
6a cable or a cable that is even higher rated.
Hardware Features
The S3300 Smart Switch includes the following key hardware features:
•
Forty eight (S3300-52X and S3300-52X-PoE+) or twenty four (S3300-28X and
S3300-28X-PoE+) 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports.
S3300-28X-PoE+) 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports.
•
Two dedicated 100M/1G/10GBASE-T ports.