Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series 管理者ガイド

Use the DiffServ Configuration screen to display DiffServ general status group information, 
which includes the current administrative mode setting as well as the current and maximum 
number of rows in each of the main DiffServ private MIB tables. 



Select QoS 







 DiffServ Configuration.

Next to DiffServ Admin Mode, select Enable.

If you disable DiffServ after it has been configured and enabled, the DiffServ 
configuration is retained and can be changed, but it is not active. 

Click the Apply button to send the updated configuration to the switch. Configuration 
changes take effect immediately.

Click the Cancel button to cancel the configuration on the screen, and reset the data on the 
screen to the latest value of the switch.

The following table describes the information displayed in the Status table on the DiffServ 
Configuration screen:

Class Table

The current and maximum number of rows of the class table. The max size is 32.

Class Rule Table

The current and maximum number of rows of the class rule table. The max size 
is 192.

Policy Table

The current and maximum number of rows of the policy table. The max size is 
32.

Policy Instance Table

The current and maximum number of rows of the policy instance table. The max 
size is 320.

Policy Attributes Table The current and maximum number of rows of the policy attributes table. The max 

size is 320.

Service Table

The current and maximum number of rows of the service table. The max size is 
338.