Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series 管理者ガイド
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Configuring Quality of Service
210
S3300 Smart Switch
The same set of fields described for IPv6 ACL classification are also supported as match
criteria for DiffServ classes. Prior to the introduction of IPv6 class rule fields, any layer 3 or
layer 4 item was interpreted as a field in an IPv4 packet. To properly interpret the match
criteria fields and create classifier entries, it is necessary for the configuration to specify what
type of packet a class defines.
criteria for DiffServ classes. Prior to the introduction of IPv6 class rule fields, any layer 3 or
layer 4 item was interpreted as a field in an IPv4 packet. To properly interpret the match
criteria fields and create classifier entries, it is necessary for the configuration to specify what
type of packet a class defines.
Policy Configuration
Use the Policy Configuration screen to associate a collection of classes with one or more
policy statements. After creating a Policy, click the policy link to the Policy screen.
policy statements. After creating a Policy, click the policy link to the Policy screen.
To create a new DiffServ policy:
1.
Select QoS
DiffServ
Advanced
Policy Configuration.
2.
Enter a policy name in the Policy Name field.
3.
Select the existing DiffServ class to associate with the policy.
4.
Click the Add button.
The available policy type is In, which indicates the type is specific to inbound traffic. This
field is not configurable.
field is not configurable.
To rename an existing policy or add a new member class to the policy:
1.
Select the check box next to the configured class.
2.
Update the desired fields.
3.
Click the Apply button.
4.
Click the Cancel button to cancel the configuration on the screen, and reset the data on the
screen to the latest value of the switch.
screen to the latest value of the switch.
To delete a policy:
1.
Click the check box associated with the policy to remove.
2.
Click the Delete button.
To configure the policy attributes:
1.
Click the name of the policy.
Figure 54. Policy Name