Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series 管理者ガイド
Configure System Information
71
S3300 Smart Switch
3.
Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.
effect immediately.
Advanced Stack-Port Configuration
To configure a Stack-port:
1.
Click System
Stacking > Advanced > Stack-port Configuration.
2.
Select either the Unit ID or All.
•
Select the Unit ID field to display information for the selected unit.
•
Select All to display information for all units.
3.
In the Configured Stack Mode field, specify the operating mode of the port to be either
Ethernet or Stack. The default value is set to Ethernet.
Ethernet or Stack. The default value is set to Ethernet.
4.
Manually reboot the switch for the changes to take effect.
Figure 28. Stack-Port Configuration
The following table describes the non-configurable Stack-port Configuration data that is
displayed.
displayed.
Table 26. Stack-port Configuration
Field
Description
Unit ID
The Unit ID of the specific switch.
Port
Displays the stack port on the given unit.
Running Stack Mode
Displays the runtime mode of the stack port.
Link Status
Displays the link status (Up/Down) of the port.
Link Speed (Gbps)
Displays the maximum speed of the stack port.
Transmit Data Rate (Mbps)
Displays the approximate transmit rate on the stack port.
Transmit Error Rate (Error/s)
Displays the number of errors in transmit packets per second.