Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series 管理者ガイド

Use this screen to enable LLDP-MED mode on an interface and configure its properties. 



Select System 







 LLDP-MED Port Settings.

From the Port list, select the port to configure.

Use the lists to enable or disable the following LLDP-MED settings for the selected port:

LLDP-MED Status. The administrative status of LLDP-MED on the interface. When 
LLDP-MED is enabled, the transmit and receive function of LLDP is effectively 
enabled on the interface.

Notification. When enabled, the port sends a topology change notification if a device 
is connected or removed.

Transmit Optional TLVs. When enabled, the port transmits the following optional 
type length values (TLVs) in the LLDP PDU frames:

MED Capabilities

Network Policy

Location Identification

Extended Power via MDI: PSE

Extended Power via MDI: PD

Inventory

Click the Apply button.

Use the LLDP Local Information screen to view the data that each port advertises through 
LLDP. To view local LLDP information, select System 







Information.

The screen includes only the interfaces on which LLDP is enabled.

The following table describes the LLDP device information and port summary information.

Chassis ID Subtype

The type of information used to identify the switch in the Chassis ID 
field.

Chassis ID

The hardware platform identifier for the switch.

System Name

The user-configured system name for the switch.