Netgear GS728TS(B) – ProSAFE 24-Port Gigabit Stackable Smart Switch with 4 SFP uplinks ソフトウェアガイド
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
161
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
IP Configuration
Use the IP Configuration page to enable routing on the switch and to view global routing
settings.
settings.
To access the IP Configuration page click Routing
IP, then click the IP Configuration link.
To configure or view the global routing settings on the switch:
1.
View the default time to live, which is the value inserted into the Time-To-Live field of the
IP header of datagrams originated by the switch if a TTL value is not supplied by the
transport layer protocol.
IP header of datagrams originated by the switch if a TTL value is not supplied by the
transport layer protocol.
2.
From the Routing Mode field, select either the Enable or the Disable radio button. You must
enable routing for the switch before you can route through any of the interfaces. Routing is
also enabled or disabled per VLAN interface. The default value is Disable.
enable routing for the switch before you can route through any of the interfaces. Routing is
also enabled or disabled per VLAN interface. The default value is Disable.
3.
View the maximum next hops, which is the maximum number of hops supported by the
switch. This is a read-only value.
switch. This is a read-only value.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
the latest value of the switch.
5.
If you make any changes to the page, click Apply to apply the changes to the system.