Netgear GS728TS(B) – ProSAFE 24-Port Gigabit Stackable Smart Switch with 4 SFP uplinks ソフトウェアガイド

In the TFTP Server IP field, specify the address of the TFTP server. The address can be an 
IP address in standard x.x.x.x format or a hostname. The hostname must start with a letter 
of the alphabet. Make sure that the software image or other file to be downloaded is 
available on the TFTP server.

In the Remote File Path field, specify the path on the TFTP server where the file is located. 
You may enter up to 96 characters.

In the Remote File Name field, specify the name of the file to download. You may enter up 
to 32 characters.

Select the Start File Transfer check box.

Click Apply to start the transfer. A status message displays during the transfer and upon 
successful completion of the transfer.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 
the latest value of the switch.

Access Profile Configuration

Use the Access Profile Configuration page to configure settings that control management 
access to the switch. Access profile configuration requires three steps: 

Use the Access Profile Configuration page to create an access profile. To add rules to 
the profile, the access profile must be deactivated, which is the default setting.

Use the Access Rule Configuration page to add one or more access rules to the profile.

Return to the Access Profile Configuration page to activate the profile.

To access the Access Profile Configuration page, click Security > Access, and then click the 
Access Control > Access Profile Configuration link.