Netgear GS728TS(B) – ProSAFE 24-Port Gigabit Stackable Smart Switch with 4 SFP uplinks ソフトウェアガイド
37
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
IPv6 Network Configuration
Use the IPv6 Network Configuration page to configure the IPv6 network interface, which is
the logical interface used for in-band connectivity with the switch via all of the switch's
front-panel ports. The configuration parameters associated with the switch's network
interface do not affect the configuration of the front-panel ports through which traffic is
switched or routed.
the logical interface used for in-band connectivity with the switch via all of the switch's
front-panel ports. The configuration parameters associated with the switch's network
interface do not affect the configuration of the front-panel ports through which traffic is
switched or routed.
To access the page, click System
Management
IPv6 Network Configuration. A screen
similar to the following is displayed.
To access the switch over a IPv6 network, you must initially configure the switch with IPv6
information (IPv6 prefix, prefix length, and default gateway). IPv6 can be configured using
any of the following options:
information (IPv6 prefix, prefix length, and default gateway). IPv6 can be configured using
any of the following options:
•
IPv6 Auto Configuration
•
DHCPv6
When in-band connectivity is established, IPv6 information can be changed using any of the
following:
following:
•
SNMP-based management
•
Web-based management