Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports ユーザーガイド
Configure Multicast
119
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
Change a Multicast Group
To change a multicast group:
1.
Select Switching
> Multicast > IGMP Snooping > Multicast Group Configuration.
The Multicast Group Configuration screen displays.
2.
Select the check box to the left of the multicast group that you want to change.
Change the VLAN ID, MAC address, or both.
3.
Click the Apply button.
The modification is displayed in the Multicast Group Configuration table.
Remove a Multicast Group
To change a multicast group:
1.
Select Switching
> Multicast > IGMP Snooping > Multicast Group Configuration.
The Multicast Group Configuration screen displays.
2.
Select the check box to the left of the multicast group that you want to remove.
3.
Click the Delete button.
The multicast group is removed from the Multicast Group Configuration table.
Manage Multicast Group Memberships
Even though a port or LAG can be a member of a VLAN, the port or LAG is not automatically
added when that VLAN is associated with a multicast address to form a multicast group. By
default, no ports or LAGs are members of a multicast group. After you have created a
multicast group, you need to add ports, LAGs, or both as static members of the multicast
group.
added when that VLAN is associated with a multicast address to form a multicast group. By
default, no ports or LAGs are members of a multicast group. After you have created a
multicast group, you need to add ports, LAGs, or both as static members of the multicast
group.
To add ports and LAGs as members of a multicast group:
1.
Select Switching
> Multicast > IGMP Snooping > Multicast Group Membership.