Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports ユーザーガイド

Click the Apply button.

The settings are saved. The CoS Interface Configuration screen displays the configured 
trust mode for all ports and LAGs (see 

142).



Select QoS > Basic > CoS Configuration.

The CoS Configuration screen displays.

Select the Interface radio button.

The screen adjusts.

From the Interface menu, select the port or LAG for which you want to configure the 
trust mode.

From the Interface Trust Mode menu, select the trust mode for the port or LAG:

Untrusted. The priority designation of an incoming packet is considered untrusted 
and the port or LAG uses its default priority values instead. You can configure the port 
default priority values on the Port PVID Configuration screen (see 

802.1p. The trust mode for all ports and LAGs is 802.1p. You can configure the 
priority-to-queue mapping on the 802.1p to Queue Mapping screen (see 

146).

DSCP. The trust mode for all ports and LAGs is DSCP. You can configure the 
DSCP-to-queue mapping on the DSCP to Queue Mapping screen (see 

147).

Click the Apply button.

The settings are saved. The per-interface setting overrides the global setting. The CoS 
Interface Configuration screen displays trust mode for the configured port or LAG (see 

142).