Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports ユーザーガイド

Select the Start File Transfer check box.

Confirm your selection.

Click the Apply button.

The file downloads to the smart switch. After the file has successfully downloaded to the 
smart switch, the following message displays: File transfer operation completed 
successfully.

After you have downloaded firmware and selected an image to become active, use this 

procedure to reboot the smart switch. This procedure does not reset the smart switch to 
factory default settings.



Select Maintenance > Reset > Device Reboot.

The Device Reboot screen displays.

Select the Check this box and click APPLY below to reboot check box.

Click the Apply button.

The reboots. The screen displays the following message: System reboot ... Please wait 2 
minutes. After two minutes, the Login screen displays.

Transfer File Path

The path on the TFTP server where the file is located. You can enter up to 
32

 

characters. Include the backslash at the end of the path. Do not enter a path 

name with a space. Leave this field blank to save the file to the root TFTP directory.

Remote File Name

The name of the file that you want to download from the TFTP server. You can enter 
up to 32 characters. Do not enter a file name with a space.