Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH ユーザーズマニュアル
Appendix B. Software Upgrade and Boot Options
|
809
NETGEAR 8800 User Manual
•
Upgraded the switch to a new core image (see
more information)
•
Downloaded the corresponding modular software package to your TFTP server. On a
modular switch, you can download the modular software package to an external compact
flash memory card (see
flash memory card (see
on page 801 for more information)
The first example uses the
terminate process
and
start process
commands to terminate
and restart the processes associated with the software module that you are updating:
terminate process exsshd graceful
download image 10.10.10.2 ng8800-11.3.0.10-ssh.xmod
run update
start process exsshd
The second example uses the
restart process
command to terminate and restart the
processes associated with the software module that you are updating:
download image 10.10.10.2 ng8800-11.3.0.10-ssh.xmod
run update
restart process exsshd
Rebooting the Switch
To reboot the switch, use one of the following commands:
reboot {time <month> <day> <year> <hour> <min> <sec>} {cancel} {msm <slot_id>}
{slot <slot-number> | node-address <node-address> | stack-topology {as-standby}
}
Use this command to schedule a time to reboot the switch or to reboot the switch
immediately. To schedule a time to reboot the switch, use the following command:
immediately. To schedule a time to reboot the switch, use the following command:
reboot time <date> <time>
Where
date
is the date and
time
is the time (using a 24-hour clock format) when the switch
will be rebooted. The values use the following format:
mm dd yyyy hh mm ss
Note:
When you configure a timed reboot of the switch, use the
show
switch
command to see the scheduled time.
To reboot the switch immediately, use the following command:
reboot
If you do not specify a reboot time, the reboot occurs immediately following the command,
and any previously schedule reboots are cancelled. To cancel a previously scheduled reboot,
use the
and any previously schedule reboots are cancelled. To cancel a previously scheduled reboot,
use the
cancel
option.