Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch 管理者ガイド
Chapter 27. PIM
|
391
ProSafe Managed Switch
Web Interface: Configure PIM-DM
PIM-DM on Switch A
1.
Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following
displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply.
2.
Configure 1/0/1 as a routing port and assign an IP address to it.
a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Under IP Interface Configuration, scroll down and select the Port 1/0/1 check box.
Now 1/0/1 appears in the Port field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.168.2.2.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
3.
Configure 1/0/9 as a routing port and assign an IP address to it.