Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch 管理者ガイド

Chapter 6. RIP

ProSafe Managed Switch

Assign IP address 192.150.3.1/24 to interface 1/0/3.

a. Select Routing > Advanced >IP Interface Configuration. A screen similar to the

following displays.

b. Scroll down and select the interface 1/0/3 check box. Now 1/0/3 appears in the

Interface field at the top.

c. Enter the following information:

•

In the IP Address field, enter 192.150.3.1.

•

In the Subnet Mask field, enter 255.255.255.0.

•

In the Routing Mode field, select Enable.

d. Click Apply to save the settings.

RIP for the Switch

Note:

Unless you have previously disabled RIP, you can skip this step

since RIP is enabled by default.

CLI: Enable RIP on the Switch

This sequence enables RIP for the switch. The route preference defaults to 15.

(Netgear Switch) #config

(Netgear Switch) (Config)#router rip

(Netgear Switch) (Config router)#enable

(Netgear Switch) (Config router)#exit

(Netgear Switch) (Config)#exit