Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch ソフトウェアガイド
IP Multicast Commands
1145
M5300, M6100, and M7100 Series ProSAFE Managed Switches
show ip igmp interface stats
This command displays the IGMP statistical information for the interface. The statistics are
only displayed when the interface is enabled for IGMP.
only displayed when the interface is enabled for IGMP.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter
is a number in the range of 1–4093.
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter
is a number in the range of 1–4093.
IGMP Proxy Commands
The IGMP Proxy is used by IGMP Router (IPv4 system) to enable the system to issue IGMP
host messages on behalf of hosts that the system discovered through standard IGMP router
interfaces. With IGMP Proxy enabled, the system acts as proxy to all the hosts residing on its
router interfaces.
host messages on behalf of hosts that the system discovered through standard IGMP router
interfaces. With IGMP Proxy enabled, the system acts as proxy to all the hosts residing on its
router interfaces.
ip igmp-proxy
This command enables the IGMP Proxy on the an interface or range of interfaces. To enable
the IGMP Proxy on an interface, you must enable multicast forwarding. Also, make sure that
there are no multicast routing protocols enabled on the router.
the IGMP Proxy on an interface, you must enable multicast forwarding. Also, make sure that
there are no multicast routing protocols enabled on the router.
Format
show ip igmp interface stats [unit/slot/port | vlan vland-id]
Modes
Privileged EXEC
User EXEC
Term
Definition
Querier Status
The status of the IGMP router, whether it is running in Querier mode or Non-Querier mode.
Querier IP Address The IP address of the IGMP Querier on the IP subnet to which this interface is attached.
Querier Up Time
The time since the interface Querier was last changed.
Querier Expiry
Time
Time
The amount of time remaining before the Other Querier Present Timer expires. If the local system is
the querier, the value of this object is zero.
the querier, the value of this object is zero.
Wrong Version
Queries
Queries
The number of queries received whose IGMP version does not match the IGMP version of the
interface.
interface.
Number of Joins
The number of times a group membership has been added on this interface.
Number of Groups
The current number of membership entries for this interface.
Format
ip igmp-proxy
Mode
Interface Config