Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch ソフトウェアガイド
Routing Commands
731
M5300, M6100, and M7100 Series ProSAFE Managed Switches
show ip vrrp interface brief
This command displays information about each virtual router configured on the switch. This
command takes no options. It displays information about each virtual router.
command takes no options. It displays information about each virtual router.
DHCP and BootP Relay Commands
This section describes the commands you use to configure BootP/DHCP Relay on the
switch. A DHCP relay agent operates at Layer 3 and forwards DHCP requests and replies
between clients and servers when they are not on the same physical subnet.
switch. A DHCP relay agent operates at Layer 3 and forwards DHCP requests and replies
between clients and servers when they are not on the same physical subnet.
bootpdhcprelay cidoptmode
This command enables the circuit ID option mode for BootP/DHCP Relay on the system.
no bootpdhcprelay cidoptmode
This command disables the circuit ID option mode for BootP/DHCP Relay on the system.
Format
show ip vrrp interface brief
Modes
Privileged EXEC
User EXEC
Term
Definition
Interface
unit/slot/port
VRID
The router ID of the virtual router.
IP Address
The virtual router IP address.
Mode
Indicates whether the virtual router is enabled or disabled.
State
The state (Master/backup) of the virtual router.
Default
disabled
Format
bootpdhcprelay cidoptmode
Mode
Global Config
Format
no bootpdhcprelay cidoptmode
Mode
Global Config