Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch ソフトウェアガイド
Configure Switching Information
259
M6100, M5300, and M7100 Series Managed Switches
The web management interface menu displays.
7.
Select Switching
> Multicast > IGMP Snooping > Multicast Router Configuration.
8.
Use Interface to select the physical interface.
9.
In the Multicast Router field, select Enable or Disable.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure a Multicast Router VLAN
You can configure the interface to only forward the snooped IGMP packets that come from
VLAN ID (<VLANID>) to the multicast router attached to this interface. The configuration is
not needed most of the time since the switch automatically detects a multicast router and
forwards the IGMP packets accordingly. It is needed only when you want to make sure that
the multicast router always receives IGMP packets from the switch in a complex network.
VLAN ID (<VLANID>) to the multicast router attached to this interface. The configuration is
not needed most of the time since the switch automatically detects a multicast router and
forwards the IGMP packets accordingly. It is needed only when you want to make sure that
the multicast router always receives IGMP packets from the switch in a complex network.
To configure a multicast router VLAN:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.