Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch ソフトウェアガイド
Configure Switching Information
267
M6100, M5300, and M7100 Series Managed Switches
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> Multicast > MLD Snooping > MLD VLAN Configuration.
8.
Use VLAN ID to set the VLAN IDs for which MLD snooping is enabled.
9.
Use Admin Mode to enable MLD snooping for the specified VLAN ID.
10.
Use Fast Leave Admin Mode to enable or disable the MLD snooping fast leave mode for
the specified VLAN ID.
11.
Use Group Membership Interval to set the value for group membership interval of MLD
snooping for the specified VLAN ID.
The valid range is (Maximum Response Time + 1) to 3600.
12.
Use Maximum Response Time to set the value for the maximum response time of MLD
snooping for the specified VLAN ID.
The valid range is 1 to (Group Membership Interval –1). Its value must be less than group
membership interval value.
membership interval value.
13.
Use Multicast Router Expiry Time to set the value for the multicast router expiry time of
MLD snooping for the specified VLAN ID.
The valid range is 0 to 3600.
14.
Click the Apply button.
The updated configuration is sent to the switch.
Enable or Disable a Multicast Router on an Interface
To enable or disable a multicast router on an interface:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.