Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch ソフトウェアガイド
Configure Switching Information
275
M6100, M5300, and M7100 Series Managed Switches
9.
Use the MVR Multicast VLAN to specify the VLAN on which MVR multicast data is
received.
All source ports belong to this VLAN. The value can be set in a range of 1 to 4094. The
default value is 1.
10.
Use the MVR Global query response time to set the maximum time to wait for the IGMP
reports membership on a receiver port. This time applies only to receiver-port leave
processing. When an IGMP query is sent from a receiver port, the switch waits for the
default or configured MVR query time for an IGMP group membership report before
removing the port from the multicast group membership. The value is equal to the tenths of
second. The range is from 1 to 100 tenths. The factory default is 5 tenths or one-half.
11.
Select a MVR Mode radio button to specify the MVR mode of operation.
The factory default is compatible.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
To refresh the screen with the latest information on the switch, click the Update button.
The following table describes the nonconfigurable information displayed on the screen.
Configure an MVR Group
To configure an MVR group:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
Table 103. Advanced MVR Configuration
Field
Definition
MVR Max Multicast Groups
The maximum number of multicast groups that MVR supports.
MVR Current Multicast Groups
Displays the current number of MVR groups allocated.