Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch ソフトウェアガイド
Multicast Routing
454
M6100, M5300, and M7100 Series Managed Switches
The web management interface menu displays.
7.
Select Routing > Multicast > Mroute Table.
To refresh the screen with the latest information on the switch, click the Update button.
The following table describes the nonconfigurable data that is displayed.
Configure Global Multicast Settings
To configure global multicast settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
Table 168. Multicast Mroute Table
Field
Description
Group IP
The destination group IP address.
Source IP
The IP address of the multicast packet source to be combined with the
group IP to fully identify a single route whose Mroute table entry.
group IP to fully identify a single route whose Mroute table entry.
Incoming Interface
The incoming interface on which multicast packets for this source/group
arrive.
arrive.
Outgoing Interfaces
The list of outgoing interfaces on which multicast packets for this
source/group are forwarded.
source/group are forwarded.
Up Time (hh:mm:ss)
The time in seconds since the entry was created.
Expiry Time (hh:mm:ss)
The time in seconds before this entry ages out and is removed from the
table.
table.
RPF Neighbor
The IP address of the reverse path forwarding (RPF) neighbor.
Protocol
The multicast routing protocol which created this entry. The possible
values are as follows:
values are as follows:
•
PIM-DM
•
PIM-SM
•
DVMRP
Flags
The value displayed in this field is valid if the multicast routing protocol
running is PIM-SM. The possible values are RPT or SPT. For other
protocols a “------” is displayed.
running is PIM-SM. The possible values are RPT or SPT. For other
protocols a “------” is displayed.