Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch 管理者ガイド
BGP
185
Managed Switches
2.
Configure the local AS as 100 and the peer AS as 200 to create an eBGP session with peer
172.126.1.2 (Switch D).
172.126.1.2 (Switch D).
(Netgear Switch) #configure
(Netgear Switch) (Config) #ip routing
(Netgear Switch) (Config) #router bgp 100
(Netgear Switch) (Config-router) # bgp router-id 172.126.1.1
(Netgear Switch) (Config-router) # network 172.126.1.0 mask 255.255.255.0
(Netgear Switch) (Config-router) # neighbor 172.126.1.2 remote-as 200
(Netgear Switch) (Config-router) #exit
Configure eBGP on Switch D
1.
Create VLAN 100 on Switch D with IP address 172.126.1.2.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan) #vlan 100
(Netgear Switch) (Vlan) #vlan routing 100
(Netgear Switch) (Vlan) #exit
(Netgear Switch) #config
(Netgear Switch) (Config) #interface 1/0/1
(Netgear Switch) (Interface 1/0/1) #vlan participation include 100
(Netgear Switch) (Interface 1/0/1) #vlan pvid 100
(Netgear Switch) (Interface 1/0/1) #interface 1/0/1
(Netgear Switch) (Interface 1/0/1) #interface vlan 100
(Netgear Switch) (Interface vlan 100) #ip address 172.126.1.2 /24
(Netgear Switch) (Interface vlan 100) #exit
(Netgear Switch) (Config) #exit
2.
Enable BGP on VLAN 200 on Switch D and using Switch A as an eBGP partner.
(Netgear Switch) (Config) #router bgp 200
(Netgear Switch) (Config-router) #bgp router-id 172.126.1.2
(Netgear Switch) (Config-router) #network 172.126.1.0 mask 255.255.255.0
(Netgear Switch) (Config-router) #neighbor 172.126.1.1 remote-as 100
(Netgear Switch) (Config-router) #exit
Check the eBGP Neighbor Status
Check the BGP neighbor on Switch A to see if the BGP neighbor is established. Use the
same command to check it on Switch D.
same command to check it on Switch D.