Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch 管理者ガイド

The Private Edge VLAN feature lets you set protection between ports located on the switch. This 
means that a protected port cannot forward traffic to another protected port on the same switch. 
The feature does not provide protection between ports located on different switches.

The diagram in this section shows a switch with four ports configured to handle the traffic for two 
VLANs. Port 1/0/2 handles traffic for both VLANs, while port 1/0/1 is a member of VLAN 2 only, 
and ports 1/0/3 and 1/0/4 are members of VLAN 3 only. The script following the diagram shows 
the commands you would use to configure the switch as shown in the diagram.

The following examples show how to create VLANs, assign ports to the VLANs, and assign a 
VLAN as the default VLAN to a port.

Create Two VLANs

The example is shown as CLI commands and as a Web interface procedure.

CLI: Create Two VLANS

Use the following commands to create two VLANs and to assign the VLAN IDs while leaving 
the names blank.

(Netgear Switch) #vlan database

(Netgear Switch) (Vlan)#vlan 2

(Netgear Switch) (Vlan)#vlan 3

(Netgear Switch) (Vlan)#exit

Layer 3 switch

Port 1/0/2 VLAN
Router Port 1/3/1
192.150.3.1

Port 1/0/3 VLAN
Router Port 1/3/2
192.150.4.1

Layer 2
Switch

Layer 2
Switch

VLAN 10

VLAN 20

Port 1/0/1