Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch 管理者ガイド

CLI: Configure SNMP V3

Web Interface: Configure SNMP V3

Change the user password.

If you set the authentication mode to MD5, you must make the length of password longer 
than 8 characters.

a. Select Security > Management Security > User Configuration > User 

Management. A screen similar to the following displays.

b.  Under User Management, scroll down and select the User Name admin check box. 

Now admin appears in the User Name field at the top.

c.  In the Password field, enter 12345678.

d.  In the Confirm Password field, enter 12345678.

e.  Click Apply to save the settings.

Configure the SNMP V3 user.

(Netgear Switch) #config

(Netgear Switch) (Config)#users passwd admin

Enter old password:

Enter new password:12345678

Confirm new password:12345678

Password Changed!

change the password to “12345678”

(Netgear Switch) (Config)#users snmpv3 authentication admin md5

Set the authentication mode to md5

(Netgear Switch) (Config)#users snmpv3 encryption admin des 12345678

Set the encryption mode to des and the key is “12345678”