Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch ソフトウェアガイド
22
Managed Switches
specified bootfile. If the unicast attempts fail, or if a TFTP server address was not provided,
Auto Install process stops. No Broadcast attempts are made.
Auto Install process stops. No Broadcast attempts are made.
Note:
The bootfile is required to have a file type of *.cfg. The bootfile
cannot have the following names: fastpath.cfg, startup-config, and
hpc_broad.cfg. These names are reserved
hpc_broad.cfg. These names are reserved
Default Network Configuration File
If the specified bootfile or the bootfile name from the DHCP server cannot be found, the
switch tries to download the default network configuration file (fp-net.cfg). The switch issues
TFTP requests for a network configuration file in the same manner as it attempts to download
a host-specific configuration file.
switch tries to download the default network configuration file (fp-net.cfg). The switch issues
TFTP requests for a network configuration file in the same manner as it attempts to download
a host-specific configuration file.
The default network configuration file should have IP address to host-name mappings using
the command ip host <hostname> <address>. If the default network configuration file does
not contain the switch IP address, the switch uses DNS to attempt to resolve its host name.
the command ip host <hostname> <address>. If the default network configuration file does
not contain the switch IP address, the switch uses DNS to attempt to resolve its host name.
A sample fp-net.cfg file follows:
config
...
ip host switch_to_setup 192.168.1.10
ip host another_switch 192.168.1.11
... <other hostname definitions>
exit
Once a host name has been determined, the switch then issues a TFTP request for a file
named <hostname>.cfg file, where <hostname> is the first eight characters of the switch’s
host name.
named <hostname>.cfg file, where <hostname> is the first eight characters of the switch’s
host name.
If the switch is unable to map its IP address to a host name, Auto Install sends TFTP requests
for the default configuration file host.cfg.
for the default configuration file host.cfg.
The following table summarizes the config files that can be downloaded, and the order in
which they are sought.
which they are sought.
Order
Sought
Sought
File Name
Description
Final File
Sought
Sought
1
<bootfile>.cfg
Host-specific config file, ending in a *.cfg file
extension
extension
Yes
2
fp-net.cfg
Default network config file
No