Netgear M5300-28G (GSM7228S) - ProSAFE 24-port Gigabit L2+ Managed Stackable Switch ソフトウェアガイド
NETGEAR Managed Switch Software Log Messages
1212
M5300, M6100, and M7100 Series ProSAFE Managed Switches
QoS
Table 55. ACL Log Messages
Component
Message
Cause
ACL
Total number of ACL rules (x) exceeds max (y)
on intf i.
on intf i.
The combination of all ACLs applied to an
interface has resulted in requiring more rules
than the platform supports.
interface has resulted in requiring more rules
than the platform supports.
ACL
ACL name, rule x: This rule is not being logged
The ACL configuration has resulted in a
requirement for more logging rules than the
platform supports. The specified rule is
functioning normally except for the logging
action.
requirement for more logging rules than the
platform supports. The specified rule is
functioning normally except for the logging
action.
ACL
aclLogTask: error logging ACL rule trap for
correlator number
correlator number
The system was unable to send an SNMP trap
for this ACL rule which contains a logging
attribute.
for this ACL rule which contains a logging
attribute.
ACL
IP ACL number: Forced truncation of one or
more rules during config migration
more rules during config migration
While processing the saved configuration, the
system encountered an ACL with more rules than
is supported by the current version. This may
happen when code is updated to a version
supporting fewer rules per ACL than the previous
version.
system encountered an ACL with more rules than
is supported by the current version. This may
happen when code is updated to a version
supporting fewer rules per ACL than the previous
version.
Table 56. CoS Log Message
Component
Message
Cause
COS
cosCnfgrInitPhase3Process: Unable to apply
saved config -- using factory defaults
saved config -- using factory defaults
The COS component was unable to apply the
saved configuration and has initialized to the
factory default settings.
saved configuration and has initialized to the
factory default settings.
Table 57. DiffServ Log Messages
Component
Message
Cause
DiffServ
diffserv.c 165: diffServRestore Failed to reset
DiffServ. Recommend resetting device
DiffServ. Recommend resetting device
While attempting to clear the running
configuration an error was encountered in
removing the current settings. This may lead to
an inconsistent state in the system and resetting
is advised.
configuration an error was encountered in
removing the current settings. This may lead to
an inconsistent state in the system and resetting
is advised.
DiffServ
Policy invalid for service intf: policy name,
interface x, direction y
interface x, direction y
The DiffServ policy definition is not compatible
with the capabilities of the interface specified.
Check the platform release notes for information
on configuration limitations.
with the capabilities of the interface specified.
Check the platform release notes for information
on configuration limitations.