Netgear M5300-28G (GSM7228S) - ProSAFE 24-port Gigabit L2+ Managed Stackable Switch ソフトウェアガイド

Falling Event: 2

Startup Alarm: Rising-Falling

Owner: MibBrowser

The statistics application gives you the ability to query for statistics on port utilization, 
flow-based and packet reception on programmable time slots. The statistics application 
collects the statistics at a configurable time range. You can specify the port number(s) or a 
range of ports for statistics to be displayed. The configured time range applies to all ports. 
Detailed statistics are collected between a specified time range in date and time format. You 
can define the time range as having an absolute time entry and/or a periodic time. For 
example, you can specify the statistics to be collected and displayed between 9:00 12 NOV 
2011 (START) and 21:00 12 NOV 2012 (END) or schedule it on every Mon, Wed, and Fri 
9:00 (START) to 21:00 (END).

You can receive the statistics in the following ways:

User requests through the CLI for a set of counters.

Configuring the device to display statistics using syslog or email alert. The syslog or email 
alert messages are sent by the statistics application at END time.

You can configure the device to display statistics on the console. The collected statistics are 
presented on the console at END time.

This command is supported on M6100 series switches only.

This command creates a new group with the specified id or name and configures the time 
range and the reporting mechanism for that group.

Format

stats group group-id | name timerange time-range name reporting 

Mode

Global Config