Netgear M5300-28G (GSM7228S) - ProSAFE 24-port Gigabit L2+ Managed Stackable Switch ハードウェアマニュアル
Introduction
7
NETGEAR Managed Stackable Switch M5300 Series
M5300 Series Rear Panel
The rear panel has a DB9 console port, a mini-USB console port, a USB host port, a
replaceable power supply, and an RPS interface. The IO module bays support any
combination of:
replaceable power supply, and an RPS interface. The IO module bays support any
combination of:
•
ProSafe 10 Gigabit Ethernet XFP Adapter (AX741)
•
ProSafe 24 Gigabit Stackable Module (AX742)
•
ProSafe 10 Gigabit Ethernet SFP+ Adapter (AX743)
•
ProSafe 10 Gigabit Ethernet CX4 Adapter (AX744)
•
Future adapter/module.
Replaceable
AC power
connector
power supply
Console
port
port
Console selection
switch
switch
Mini-USB and USB
console ports
Figure 3. M5300 Series rear panel
10/100/1000M ports
(2 LEDs per port)
(2 LEDs per port)
Link/ACT LED:
• Off: No link is established on the port.
• Solid green: A valid link is established on the port.
• Blinking green: The port is sending or receiving packets.
• Off: No link is established on the port.
• Solid green: A valid link is established on the port.
• Blinking green: The port is sending or receiving packets.
SPD LED:
• Off: No link or a valid link is established on the port.
• Solid yellow: A valid 10/100 Mbps link is established on the port.
• Solid green: A valid 1000 Mbps link is established on the port.
• Off: No link or a valid link is established on the port.
• Solid yellow: A valid 10/100 Mbps link is established on the port.
• Solid green: A valid 1000 Mbps link is established on the port.
Note:
If combo port media changes to fiber, the copper port LED
turns off.
SFP ports
(1 LED per port)
(1 LED per port)
SPD/Link/ACT LED:
• Off: No SFP module link is established on the port.
• Solid Green: A valid 1000 Mbps SFP module link is established on the port.
• Blinking Green: 1000 Mbps packet transmission or reception is occurring on the port.
• Solid Yellow: A valid 100 Mbps SFP module link is established on the port.
• Blinking Yellow: 100 Mbps packet transmission or reception is occurring on the port.
• Off: No SFP module link is established on the port.
• Solid Green: A valid 1000 Mbps SFP module link is established on the port.
• Blinking Green: 1000 Mbps packet transmission or reception is occurring on the port.
• Solid Yellow: A valid 100 Mbps SFP module link is established on the port.
• Blinking Yellow: 100 Mbps packet transmission or reception is occurring on the port.
Note:
If combo port media changes to copper, the SFP port LED
turns off.
Table 1. LED descriptions for M5300 Series switches (continued)
LED
Description