Netgear M5300-28G (GSM7228S) - ProSAFE 24-port Gigabit L2+ Managed Stackable Switch 管理者ガイド

ページ / 721
Captive Portal 
705
 Managed Switches
The following table indicates the RADIUS attributes that are used to configure captive portal 
users. The table indicates both RADIUS attributes and vendor specific attributes (VSA) that 
are used to configure captive portal. VSAs are denoted in the ID column and are comma 
delimited (vendor ID, attribute ID).
Table 6.  RADIUS Attributes for Configuring Captive Portal Users 
 
RADIUS Attribute No.
Description
Range
Usage
Default
User-Name
1
User name to be authorized.
1–32 characters Required
None
User-Password
2
User password.
8–64 characters Required
None
Session-Timeout
27
Logout once session timeout is 
reached (seconds). If the attribute is 
0 or not present, use the value 
configured for the captive portal.
Integer 
(seconds)
Optional
0
Idle-Timeout
28
Log out once idle timeout is reached 
(seconds). If the attribute is 0 or not 
present, use the value configured for 
the captive portal.
Integer 
(seconds)
Optional
0
WISPr-Max-Band
width-Up
14122, 7
Maximum client transmit rate (b/s). 
Limits the bandwidth at which the 
client can send data into the network. 
If the attribute is 0 or not present, use 
the value configured for the captive 
portal.
Integer
Optional
0
WISPr-Max-Band
width-Down
14122, 8
Maximum client receive rate (b/s). 
Limits the bandwidth at which the 
client can receive data from the 
network. If the attribute is 0 or not 
present, use the value configured for 
the captive portal.
Integer
Optional
0
CLI: Configure RADIUS as the Verification Mode
(Netgear Switch) (Config-CP 1)#radius-auth-server Default-RADIUS-Server
(Netgear Switch) (Config-CP 1)#verification radius