Netgear M5300-28G (GSM7228S) - ProSAFE 24-port Gigabit L2+ Managed Stackable Switch ソフトウェアガイド
Configure Quality of Service
522
M6100, M5300, and M7100 Series Managed Switches
8.
Use Traffic Type to define the DiffServ Class.
Traffic type options are: VOIP, HTTP, FTP, Telnet, and Every.
9.
Ports displays the ports which can be configured to support a DiffServ policy.
The DiffServ policy is added to selected ports.
10.
Use Enable Policing to add policing to the DiffServ policy.
The policing rate to be applied.
11.
Specify the Committed Rate:
•
When Policing is enabled, the committed rate is applied to the policy and the policing
action is set to conform.
action is set to conform.
•
When Policing is disabled, the committed rate is not applied and the policy is set to
markdscp.
markdscp.
12.
Specify the Outbound Priority:
•
When Policing is enabled, Outbound Priority defines the type of policing conform
action where: High sets action to markdscp ef, Med sets the action to markdscp af31,
and Low sets the action to send.
action where: High sets action to markdscp ef, Med sets the action to markdscp af31,
and Low sets the action to send.
•
When Policing is disabled, Outbound Priority defines the policy where: High sets the
policy to mark ipdscp ef, Med sets policy to mark ipdscp af31, and Low sets the policy
to mark ipdscp be.
policy to mark ipdscp ef, Med sets policy to mark ipdscp af31, and Low sets the policy
to mark ipdscp be.
Configure Basic DiffServ Settings
Packets are filtered and processed based on defined criteria. The filtering criteria is defined
by a class. The processing is defined by a policy's attributes. Policy attributes can be defined
on a per–class instance basis, and it is these attributes that are applied when a match occurs.
by a class. The processing is defined by a policy's attributes. Policy attributes can be defined
on a per–class instance basis, and it is these attributes that are applied when a match occurs.
The configuration process begins with defining one or more match criteria for a class. Then
one or more classes are added to a policy. Policies are then added to interfaces.
one or more classes are added to a policy. Policies are then added to interfaces.