Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル
Configure Switching Information
263
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
is common. Many nodes require ingress traffic to be tagged with a specific VLAN ID, and
other nodes require egress traffic to be transmitted with a specific VLAN ID. With the use
of MVRP on both ingress and egress, no manual VLAN configuration is required to pass
tagged traffic through the network.
other nodes require egress traffic to be transmitted with a specific VLAN ID. With the use
of MVRP on both ingress and egress, no manual VLAN configuration is required to pass
tagged traffic through the network.
Note:
MRP framework must be available and enabled in all intermediate
devices to ensure that the propagation of the attributes occurs
throughout the network.
devices to ensure that the propagation of the attributes occurs
throughout the network.
With MRP, network attributes are declared, registered, withdrawn, and removed
completely dynamically without any user intervention. This dynamic nature is especially
useful in networks where the following is true:
completely dynamically without any user intervention. This dynamic nature is especially
useful in networks where the following is true:
-
Network attributes are likely to change frequently, requiring reconfiguration of the
intermediate devices.
intermediate devices.
-
Recipients of these attributes frequently increase or decrease in number.
-
Each of these changes without a dynamic self-adjusting framework would require
constant attention from the network administrator.
constant attention from the network administrator.
Configure Global MRP Settings
You can configure global MRP settings for the switch.
To configure global MRP settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching > MRP > Basic > MRP Configuration.