Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル

The following table describes the nonconfigurable data that is displayed. 

You can statically configure the rendezvous point (RP) address for one or more multicast 
groups.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Routing

> IPv6 Multicast > IPv6 PIM > Static RP Configuration. 

In the RP Address field, enter the IP address of the RP.

In the Group Address field, enter the address of the RP.

In the Prefix Length field, enter the group address prefix length.

In the Override field, select Enable or Disable. 

 indicates that, if there is a conflict, the RP configured with this option prevails 

over the RP learned by BSR.

BSR Expiry Time (hh:mm:ss) 

Time (in hours, minutes and seconds) in which the learned elected 
bootstrap router (BSR) expires.

IP Address

The IP address of the elected BSR.

Next bootstrap Message 
(hh:mm:ss) 

Time (in hours, minutes, and seconds) in which the next bootstrap 
message is due from this BSR. 

Next Candidate RP Advertisement 
(hh:mm:ss)

Time (in hours, minutes, and seconds) in which the next candidate RP 
advertisement is sent.