Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル
Manage Device Security
545
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Protect Ports
If a port is configured as protected, it does not forward traffic to any other protected port on
the switch, but it does forward traffic to unprotected ports. You can configure the ports as
protected or unprotected. You need read-write access privileges to modify the configuration.
the switch, but it does forward traffic to unprotected ports. You can configure the ports as
protected or unprotected. You need read-write access privileges to modify the configuration.
To configure protected ports:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Traffic Control > Protected Ports.
6.
In the Group ID list, select a group of protected ports that can be combined into a logical
group.
Traffic can flow between protected ports belonging to different groups, but not within the
same group. The list includes all the possible protected port group IDs supported for the
current platform. The valid range of the gGroup ID is 0 to 2.
same group. The list includes all the possible protected port group IDs supported for the
current platform. The valid range of the gGroup ID is 0 to 2.
7.
Use the optional Group Name field to associate a name with the protected ports group
(used for identification purposes).
It can be up to 32 alphanumeric characters long, including blanks. The default is blank.
This field is optional.
This field is optional.
8.
Click the orange bar to display the available ports.
9.
Select the check box below each port to configure as a protected port.
The selection list consists of physical ports, protected as well as unprotected. The
protected ports are tick-marked to differentiate between them. No traffic forwarding is
possible between two protected ports. If left unconfigured, the default state is
unprotected.
protected ports are tick-marked to differentiate between them. No traffic forwarding is
possible between two protected ports. If left unconfigured, the default state is
unprotected.