Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル
Manage Device Security
589
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure MAC ACL Rules
You can define rules for MAC-based ACLs. The access list definition includes rules that
specify whether traffic matching the criteria is forwarded normally or discarded. A default
deny all rule is the last rule of every list.
specify whether traffic matching the criteria is forwarded normally or discarded. A default
deny all rule is the last rule of every list.
To configure MAC ACL rules:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > ACL > Basic > MAC Rules.
6.
From the ACL Name menu, select the MAC ACL for which you want to add or a change a
rule.
7.
Use Sequence Number to enter a whole number in the range of 1 to 2147483647.
This number is used to identify the rule. A MAC ACL can contain up to 1023 rules.
8.
Use Action to specify what action is taken if a packet matches the rule's criteria.
The choices are Permit or Deny.
9.
Use Assign Queue ID to specify the hardware egress queue identifier used to handle all
packets matching this ACL rule.
Valid range of queue IDs is 0 to 7.
10.
Mirror Interface
to specify the specific egress interface where the matching traffic stream is
copied in addition to being forwarded normally by the device.
This field cannot be set if a redirect interface is already configured for the ACL rule. This
field is visible for a Permit action.
field is visible for a Permit action.
11.
Use Redirect Interface to specify the specific egress interface where the matching traffic
stream is forced, bypassing any forwarding decision normally performed by the device.
This field cannot be set if a mirror interface is already configured for the ACL rule.